NDT Course in Kochi
Evaluate material and weld integrity without damaging the component. Master Radiographic, Ultrasonic, Magnetic Particle, Penetrant, and Visual Testing — then apply them on live equipment at our Kochi campus.
About the NDT — Non-Destructive Testing course
Non-Destructive Testing (NDT) is the backbone of quality assurance across oil & gas, power generation, shipbuilding, aerospace, and heavy fabrication. SMIC's NDT programme in Kochi equips you with working knowledge of the five principal methods — Radiographic Testing (RT), Ultrasonic Testing (UT), Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT) — so you can detect surface and sub-surface discontinuities without altering or damaging the component under examination.
The programme follows a hybrid model designed for working professionals and fresh graduates alike. The practical campus block (~4 weeks) at our Kochi facility gives you direct, supervised time on industrial testing equipment — film processing units, ultrasonic flaw detectors, magnetic yokes, and UV inspection lamps. The remaining online phase covers theory, code references, interpretation standards, and report writing through live instructor-led sessions and a rich library of recorded modules, so you can study from anywhere in India, the Gulf, or Europe.
Successful completers are prepared to pursue ASNT SNT-TC-1A Level I/II qualification or ISO 9712 / PCN certification through recognised third-party examining bodies. SMIC guides you through the certification pathway — including recommended employer sign-off, practical hours documentation, and written/practical exam preparation — in truthful, general terms aligned with each scheme's published requirements.
What you'll cover
A structured, industry-mapped syllabus — practical on campus, theory and projects online.
Module 1 — Introduction to NDT & Safety
- Principles of NDT and the role of quality assurance in industry
- Overview of applicable codes and standards: ASNT, ISO 9712, ASME, AWS
- Radiation safety fundamentals and regulatory framework (BARC/AERB context)
- Personal protective equipment and safe working practices in NDT environments
Module 2 — Visual Testing (VT)
- Direct and remote visual inspection techniques
- Selection and use of borescopes, mirrors, magnifiers, and video probes
- Weld profile assessment and surface condition evaluation
- Documentation, acceptance criteria, and VT report writing
Module 3 — Liquid Penetrant Testing (PT)
- Principles of capillary action and penetrant uptake
- Solvent-removable, water-washable, and post-emulsifiable systems
- Fluorescent and visible dye penetrant procedures
- Interpretation of indications and discontinuity characterisation
- PT limitations, material compatibility, and surface preparation requirements
Module 4 — Magnetic Particle Testing (MT)
- Theory of magnetism and flux leakage at discontinuities
- Continuous and residual magnetisation techniques
- Wet and dry particle methods; fluorescent particle inspection
- Magnetisation equipment: yokes, prods, coils, and central conductors
- Demagnetisation procedures and post-inspection requirements
Module 5 — Radiographic Testing (RT)
- X-ray and gamma-ray generation, attenuation, and film exposure principles
- Industrial radiography equipment: X-ray sets and isotope projectors (Ir-192, Se-75)
- Film processing, densitometry, and image quality indicator (IQI) evaluation
- Radiographic interpretation: weld defects, casting anomalies, and wall-thickness assessment
- Radiation safety protocols, controlled areas, and dose monitoring
Module 6 — Ultrasonic Testing (UT)
- Generation and propagation of ultrasonic waves; piezoelectric transducers
- A-scan, B-scan, and C-scan display modes and their interpretation
- Contact testing with normal and angle-beam probes for weld and plate inspection
- Distance-Amplitude Correction (DAC) and Time-Corrected Gain (TCG) calibration
- Phased Array UT (PAUT) awareness and industry applications
Module 7 — Hands-On Practical Block (Campus, Kochi)
- Supervised practical sessions on industrial test specimens: weld plates, pipes, and castings
- Equipment setup, calibration, and operational checks for all five methods
- Defect identification exercises: porosity, cracks, lack of fusion, inclusions
- Timed practical assessments replicating third-party certification exam conditions
Module 8 — Interpretation, Reporting & Certification Pathways
- Structured NDT report writing aligned with industry and client formats
- Acceptance and rejection criteria per ASME Section V, AWS D1.1, and ISO standards
- ASNT SNT-TC-1A Level I/II requirements: training hours, experience, and examination overview
- ISO 9712 / PCN scheme structure: sector-specific qualifications and renewal cycles
- Career planning: assembling a logbook of practical hours for employer certification
Job-ready capabilities
Where this course can take you
Roles our graduates target across Kochi, Kerala, the Gulf and beyond.
NDT Technician (Level I/II)
Entry-level and mid-level inspection roles across fabrication yards, refineries, and power plants in India and the Gulf.
RT Inspector
Radiographic inspection of welds and pressure vessels; high demand in oil & gas and petrochemical sectors.
UT Inspector
Ultrasonic flaw detection and thickness measurement on pipelines, pressure equipment, and structural steel.
NDT Inspector — Oil & Gas
Upstream, midstream, and downstream inspection of pipelines, risers, and process equipment; substantial Gulf region opportunities.
Quality Control Inspector (NDT)
Embedded in fabrication and manufacturing QC teams, ensuring weld and material quality before handover.
Weld Inspector (CWI support role)
Works alongside Certified Welding Inspectors to carry out VT and MT on structural and pressure weldments.
Aerospace & Defence NDT Technician
Inspection of airframe components and propulsion systems; requires additional sector-specific qualification post-employment.
NDT Coordinator / Senior Inspector
Supervisory role managing inspection programmes, subcontractor oversight, and client reporting — typically Level II qualified.
Trained for the job, not just the test
Real Equipment, Real Specimens
SMIC's Kochi campus practical block puts you on the same industrial equipment used in the field — flaw detectors, radiography projectors, magnetic yokes, and UV lamps — with actual weld specimens, not plastic mock-ups.
Learn While You Earn — Study from Anywhere
The hybrid model means your campus commitment is focused and short (~4 weeks). Theory, live classes, and mentor sessions run online, so employed professionals in India, the Gulf, or Europe can complete the programme without extended leave.
Certification-Pathway Guidance
Our instructors walk you through the ASNT SNT-TC-1A and ISO 9712 documentation requirements — training-hour logs, employer-verification letters, and exam structure — so you enter a third-party exam prepared, not guessing.
Industry-Relevant Faculty
Trainers are practising NDT professionals with field experience in oil & gas, shipbuilding, and heavy fabrication. Instruction is grounded in current site practice, not purely academic.
Kochi Location — Gateway to Gulf Projects
Kerala is one of India's largest sources of NDT manpower for Gulf construction and maintenance contracts. Training in Kochi connects you to a strong regional alumni network and relevant project pipelines.
Flexible Intake & Mentorship
Small cohort sizes allow personalised mentoring and flexible scheduling for the online phase, with recorded sessions available 24/7 for revision.
Eligibility
- Minimum 10+2 (Higher Secondary) in Science or equivalent; diploma holders in Mechanical, Civil, Electrical, or related engineering disciplines are encouraged to apply.
- Degree or diploma in Mechanical, Metallurgical, or Manufacturing Engineering preferred but not mandatory for all intake streams.
- Basic colour vision and near-vision acuity consistent with ASNT/ISO 9712 medical requirements (candidates will be advised to self-check before enrolment).
- No prior NDT experience required for Level I-preparatory track; candidates with existing site experience may apply for the Level II-preparatory track.
- Willingness to attend the Kochi campus practical block in person for the required duration (~4 weeks); travel and accommodation arrangements are the candidate's responsibility.
- Access to a reliable internet connection and a laptop or desktop computer for the online phase.
NDT — Non-Destructive Testing — your questions
SMIC's campus is based in Kochi, Kerala. The practical block is conducted at our on-campus workshop equipped with industrial NDT equipment. Exact address and directions are shared with confirmed enrolees. The online phase can be attended from any location with a stable internet connection.
No. ASNT SNT-TC-1A and ISO 9712 qualifications are awarded by ASNT and recognised third-party certification bodies respectively, not by training institutes. SMIC provides the training, practical hours documentation, and exam preparation needed for you to sit those external examinations. We are transparent about this distinction so there are no surprises.
The programme covers VT, PT, MT, RT, and UT — all five core methods. All five include practical exercises during the Kochi campus block. RT practical involves supervised use of gamma and X-ray equipment under radiation-safety protocols.
Yes — the hybrid format is designed precisely for this. You will need to arrange leave for the campus practical block (~4 weeks). The online phase has live evening/weekend sessions and 24/7 access to recordings, making it manageable alongside employment in India or overseas.
NDT is in consistent demand across oil & gas, petrochemical, shipbuilding, and infrastructure sectors in the Gulf (UAE, Saudi Arabia, Qatar, Oman) as well as domestically in refineries, power plants, and fabrication yards. Kerala has a well-established pipeline of technical professionals to Gulf projects, and ASNT/ISO 9712 qualified NDT inspectors are actively sought.
Level I technicians perform specific calibrated tests under supervision and record results. Level II inspectors are qualified to set up and calibrate equipment, interpret and evaluate results, and prepare written procedures. Most field positions require at least Level II. SMIC's programme prepares you with the training hours and knowledge base for either level, after which employer sign-off and a third-party examination lead to formal qualification.
There is no upper age limit. The programme welcomes fresh graduates, mid-career professionals transitioning into inspection roles, and experienced site workers formalising their skills with recognised certification preparation. Eligibility is primarily based on educational background and vision standards.
Request the NDT — Non-Destructive Testing syllabus
Tell us a little about yourself and a counsellor will share the full syllabus, fees and upcoming cohort dates within 24 hours.
Send us a message
Fill in the form and a counsellor will get back to you shortly.